eorganize

Compartment organizer box filled with assorted automotive push-type retainer clips, trim fasteners, and nylon rivets in various sizes.

20-piece set of white nylon hole plugs / push retainers with rubber O-rings, 5mm, fitment for Tesla Model X (part 1025401-00-A); shown new in the original mailer.

Boxes of electrogalvanized ring-shank collated coil roofing nails (3/4 in. x .120 in.) for pneumatic coil roofing nailers.

Strips of collated screws that load into an auto-feed screw gun.

20-foot roll of heavy-duty black self-adhesive hook-and-loop (Velcro-style) fastening tape that mounts without screws.

Box of 2,500 divergent-point hog ring staples (model M7-RING61G050) for pneumatic hog ring guns.

Assortment of metal strapping seals (crimp clips) for securing steel banding, plus a bag of wire buckles. Made in USA.

Spring-loaded pliers with a notched jaw for closing metal ring fasteners such as hog rings and metal cable ties.

Bag of coated stainless steel self-locking cable ties, 4.6 mm x 300 mm, roughly 100 count.

Box of 1000 galvanized hog rings, 11/16 in (17.4 mm), model DWR16G1M; for fastening fabric, fencing, cages, wreaths, nets, and bags.

Bundle of long hot-dip galvanized hex-head lag screws with washers, for heavy timber and structural fastening.

Aluminum mounting brackets and clamps with stainless bolts for securing solar panels to rails.

Loose pile of blue corrosion-coated coarse-thread screws for masonry and concrete.

1-1/2 in (38 mm) 18-gauge galvanized narrow crown staples for a pneumatic stapler, 5000-count box.

#10 x 2-1/2 in exterior wood and deck screws with a #2 Phillips drive.

Bronze-coated #8 x 2 in star-drive screws for decking and outdoor wood, 375-count (2 lb) box.

Metal ring clips used to fasten square wire mesh to metal fence frames.

Dark masonry screws for driving into concrete, stored loose in a clear plastic tub.

Assorted collated nails for pneumatic nailers — wire-collated coil nails plus plastic and strip-collated framing nails.

Pack of 100 concrete screw anchors, 3/16 inch by 1-1/4 inch, with the required drill bit included; for fastening into concrete, brick, and block.

Boxes of 18-gauge brad nails and 16-gauge angled finish nails.

Assorted boxes of staples and brad nails, including T50 staples and 18-gauge brads.

Assorted boxes of wood and construction screws in various lengths, including pocket-hole and deck screws.

Plastic organizer bin filled with bagged flat, fender, and lock washers in assorted sizes.

Assorted hardware including door hinges, metal brackets, threaded rods, and bagged fasteners.

A precision screwdriver set with interchangeable bits alongside several assortment kits of small screws and machine screws in compartment cases.

Several compartment organizer cases of small hardware: machine screws, bolts, nuts, washers, wall anchors, screw eyes and cup hooks, and picture-hanging brackets.

Assorted staples (Arrow T50, T20, and heavy-duty PowerShot/Stanley) and boxes of aluminum blind rivets.

Clear plastic bin filled with assorted loose hardware — screws, bolts, brackets, and fasteners.

Box of 20 zinc-plated heavy-duty wedge anchors for concrete, brick, and stone; each includes a threaded stud, expansion clip, nut, and washer.