eorganize

Assortment of tape rolls, including blue, clear, and black rolls.

Black plastic knob/foot with a wide oval base and a threaded metal stud with washer; a replacement handle or leveling foot.

Small roll of clear/transparent adhesive tape.

Roll of silver cloth-backed duct tape for general-purpose repairs and bundling.

Roll of clear/transparent adhesive tape.

Bin of miscellaneous salvaged parts — wiring harnesses, connectors, brackets, wire loom, and an aluminum plate.

Assorted rolls of perforated metal hanger/plumber's strapping (galvanized) with mounting holes, plus a few plastic strapping reels.

Compartment organizer box filled with assorted automotive push-type retainer clips, trim fasteners, and nylon rivets in various sizes.

20-piece set of white nylon hole plugs / push retainers with rubber O-rings, 5mm, fitment for Tesla Model X (part 1025401-00-A); shown new in the original mailer.

Pair of hinged black plastic clamp brackets that fasten around a round tube or pole, tightened with a screw.

Assorted red vinyl-coated screw-in utility/storage hooks, braided bungee cords, and a pair of pliers.

Set of yellow ratchet tie-down straps with metal ratchet mechanisms and J-hooks for securing cargo.

Boxes of electrogalvanized ring-shank collated coil roofing nails (3/4 in. x .120 in.) for pneumatic coil roofing nailers.

Box of 2,500 divergent-point hog ring staples (model M7-RING61G050) for pneumatic hog ring guns.

Assortment of metal strapping seals (crimp clips) for securing steel banding, plus a bag of wire buckles. Made in USA.

Pair of long dark steel bars/rails with a channeled profile; specific use unknown.

Pair of flat silver strips with a row of rectangular slots down the center and a pointed tip; specific use unclear.

Length of polished stainless steel round tube.

Bag of coated stainless steel self-locking cable ties, 4.6 mm x 300 mm, roughly 100 count.

Box of 1000 galvanized hog rings, 11/16 in (17.4 mm), model DWR16G1M; for fastening fabric, fencing, cages, wreaths, nets, and bags.

Bundle of long hot-dip galvanized hex-head lag screws with washers, for heavy timber and structural fastening.

Reusable double-sided hook-and-loop wrap for bundling cables and wires; 15mm x 5m rolls.

Aluminum mounting brackets and clamps with stainless bolts for securing solar panels to rails.

Black 3D-printed ABS clips with a keyhole slot that snaps around cords and cables to bundle and route wiring.

Loose pile of blue corrosion-coated coarse-thread screws for masonry and concrete.

1-1/2 in (38 mm) 18-gauge galvanized narrow crown staples for a pneumatic stapler, 5000-count box.

#10 x 2-1/2 in exterior wood and deck screws with a #2 Phillips drive.

Bronze-coated #8 x 2 in star-drive screws for decking and outdoor wood, 375-count (2 lb) box.

Metal ring clips used to fasten square wire mesh to metal fence frames.

Dark masonry screws for driving into concrete, stored loose in a clear plastic tub.

Assorted collated nails for pneumatic nailers — wire-collated coil nails plus plastic and strip-collated framing nails.

Pack of 100 concrete screw anchors, 3/16 inch by 1-1/4 inch, with the required drill bit included; for fastening into concrete, brick, and block.

Boxes of 18-gauge brad nails and 16-gauge angled finish nails.

Assorted boxes of staples and brad nails, including T50 staples and 18-gauge brads.

Assorted boxes of wood and construction screws in various lengths, including pocket-hole and deck screws.

Plastic organizer bin filled with bagged flat, fender, and lock washers in assorted sizes.

Pair of two-jaw pullers with threaded center forcing screws, with a bag of extra jaws and hardware.

Assorted hardware including door hinges, metal brackets, threaded rods, and bagged fasteners.

Mounting hardware: super clamps, articulating ball-arm mounts, and magnetic bases.

Bagged assortment of cable zip ties in multiple sizes and colors.

Paracord and rope, rope-ratchet tie-downs, carabiners, shackles, and spring clips.

Several compartment organizer cases of small hardware: machine screws, bolts, nuts, washers, wall anchors, screw eyes and cup hooks, and picture-hanging brackets.

Roll of black heavy-duty vinyl-coated wire mesh (hardware cloth) for fencing or enclosures.

Bag of assorted metal chains.

Metal wall-mount bracket for a flat-screen TV, with bolt hardware.

Assorted metal L-shaped angle brackets in a bin.

Clear plastic bin filled with assorted loose hardware — screws, bolts, brackets, and fasteners.

Box of 20 zinc-plated heavy-duty wedge anchors for concrete, brick, and stone; each includes a threaded stud, expansion clip, nut, and washer.

Galvanized steel drop rod with an L-shaped handle and two mounting brackets; drops into a ground socket to lock a swing gate in place and stop it from moving.

Coil of gray non-metallic flexible electrical conduit (½ in) and two 2 in rubber pipe couplers with stainless steel band clamps; one coupler still bagged.

Black triangular plastic brackets with notched cutouts that cradle items like chairs or tools resting on top.

Sealed parts bags of replacement screws and metal hardware for Lifetime plastic sheds (part number 0480545).

Clear plastic tub holding yellow jumper cables, a yellow/teal tow rope, blue rope, a garden hand tool with green grips, and a bag of metal hardware (battery terminal lugs and a carabiner).