Task Force toolbox

Portable lithium jump-start pack for car batteries, in a black zippered soft case with white JUMP STARTER lettering.

Pair of ratcheting RJ45 crimping tools for pass-through modular plugs; terminates Ethernet cable.

Cat6 pass-through RJ45 modular plugs for terminating Ethernet cable; two containers (Cable Matters 100-pack jar and UBIGEAR 100-piece bag).

Inline RJ45 coupler for joining two Ethernet patch cables end to end.

Portable Ethernet cable tester in a zippered carrying case; checks continuity and wiring order of RJ45 network cables.

Gold-plated shielded 8P8C/RJ45 modular plug connectors for terminating Ethernet cable; 10-pack (P/N SJ650, UL E136825).

Retail-boxed Ethernet patch cable with gold-plated RJ45 connectors; compatible with routers, modems, PCs, laptops, and game consoles.

VCELINK shielded RJ45 modular plug connectors in assorted colors (blue and red boots) for terminating Ethernet cable (P/N SJ650, UL E136825).

Bin of automotive electrical bits — a 220-piece blade-fuse assortment (mini/standard), assorted loose blade and glass fuses, inline fuse holders/taps, and a 100W load resistor.

A bagged black inline electrical component with red/black leads (marked NT30TFNCE120CB, likely a thermal protector/limiter) shown with a 200-piece fast-blow glass fuse assortment kit (5x20mm and 6x30mm).

Two Qianji JQX-62F 80A high-power relays — one with a 12VDC coil (JQX-62F-2C) and one with an AC110V coil, rated 250VAC/28VDC.

Omron G9EA-1-B high-capacity DC power relay with a 12VDC coil (model G9EA1003H), new in box.

Victron Energy BatteryProtect BP 12/24 100A — a low-voltage battery disconnect that cuts the load to protect a 12/24V battery from over-discharge, with programmable alarm/remote terminals.

Waterproof, ignition-protected 40A resettable circuit breaker with a manual reset button, for 12V DC automotive, marine, and audio systems.

Pair of DIN-rail miniature circuit breakers, model DZ47-63Z, rated C63 (63A) at 250V, ganged together with a lead.

MidNite Solar MNEPV30 30A DIN-rail DC circuit breaker for solar PV systems; polarity sensitive.

Gold aluminum-housed wirewound power resistor rated 100W, 10 ohm — the type used as an LED load resistor or dummy load.

Boxed plug-in AC power adapter; no model or ratings visible on the box.

Pen-style non-contact voltage detector that lights and beeps near live AC wiring.

Black AC/DC power adapter brick with a DC barrel-plug lead.

Modified-wave 150W power inverter (model MRI1511AU) that plugs into a 12V socket and provides an AC outlet plus USB charging (5V/4.2A).

Automatic trickle charger/maintainer for 12V lead-acid batteries (model YS-1201250, output 13.8V/1250mA) with alligator-clip leads and a charge status light.

Set of split-core current-transformer (CT) clamps with lead cables and small jack connectors, used with a home energy monitor to sense current on mains conductors.

Item described in a voice note as possibly a fuse holder; no photo available to confirm.

Smart battery checker/meter for RC LiPo and other packs; reads overall and per-cell voltage, capacity, and internal resistance.

An opened round/squircle electronic device exposing its LCD and circuit board with a multi-wire harness; make and function are not identifiable from the photo.

Laser detector/receiver for line lasers, with a clamp mount; picks up laser lines beyond visible range for outdoor leveling.

Three plug-in WiFi smart outlets, each with a single AC receptacle and a power button, for app or voice control of plugged-in devices.

Small zippered case holding a coiled yellow cable with a threaded connector plus a black accessory; the specific device is not identifiable from the photo.

Round 7-blade (7-way) trailer wiring connector plug with labeled pin terminals for trailer/RV lighting and brakes; includes a mounting bracket/holder.

Compact power inverter that plugs into a vehicle 12V cigarette-lighter socket and provides a standard household AC outlet.

Plug-in GFCI outlet tester with indicator lights for open ground, open neutral, open hot, reversed wiring, and correct wiring, plus a button to trip and verify GFCI outlets.

Two-piece wire continuity tester with a main unit and a separate remote end, used to trace and verify continuity of wire runs.

Trailer wiring adapter with a round 7-way plug on one end and a blade socket with a flip-up weather cover on the other.

Plug-in electricity usage monitor with an LCD readout for voltage, amperage, wattage, frequency, power factor, and cumulative kilowatt-hours of a plugged-in device.

Plug-in electricity usage monitor with an LCD readout for voltage, amperage, wattage, frequency, power factor, and cumulative kilowatt-hours of a plugged-in device.

Castable wireless sonar fish finder: a waterproof sonar ball that pairs with a phone to read water depth and locate fish. Comes with its neoprene carry pouch.

Handheld circuit breaker finder transmitter that plugs into an outlet and pairs with a receiver to identify which breaker controls a given circuit.

Assortment of Square D Homeline (HOM) plug-in circuit breakers in mixed amperages from 15A to 50A, both single- and double-pole (DP-4075).