Black toolbox

Pair of stainless steel locking forceps (hemostats) with ratcheting ring handles.

Socket-style driver tools for twisting wire-mesh connectors closed, with a hex bit adapter.

Telescoping magnetic pickup wands for retrieving dropped ferrous parts from tight spots.

Dual-end pry bar with a forked nail-puller claw on one end and a flat pry/scraper blade on the other, with a cushioned grip.

Long polished chrome metal rods/bars.

High-leverage compact bolt/wire cutters for cutting hardened wire, nails, bolts, and rivets.

Spring-loaded flexible-shaft claw pickup tools for retrieving small dropped parts from tight spaces.

Ratcheting PVC pipe cutter with a blue handle for clean, square cuts on plastic pipe and tubing.

High-tension hacksaw frame fitted with a 10 in, 24-TPI flexible carbon-steel blade for cutting metal.

Reel-type chalk line that snaps long, straight layout lines; holds marking chalk inside the housing.

Red-handled wrench with a locking, serrated jaw for gripping pipe and round stock.

Long-reach utility lighter for igniting grills, stoves, and campfires.

Cluster of hand tools — tongue-and-groove (channel-type) pliers, aviation/tin snips, and pruning shears.

Long driver-bit extension shafts for reaching recessed screws with a drill or impact driver.

Set of pry/leverage bars with cushioned handles for prying, lifting, and removing fasteners.

Heavy red steel pipe wrench with serrated, adjustable jaws for gripping and turning pipe.

Pair of curved-jaw locking pliers (Vise-Grip style) with adjustable, lockable clamping force.

Loose pile of blue corrosion-coated coarse-thread screws for masonry and concrete.

1-1/2 in (38 mm) 18-gauge galvanized narrow crown staples for a pneumatic stapler, 5000-count box.

#10 x 2-1/2 in exterior wood and deck screws with a #2 Phillips drive.

Bronze-coated #8 x 2 in star-drive screws for decking and outdoor wood, 375-count (2 lb) box.

Metal ring clips used to fasten square wire mesh to metal fence frames.

Dark masonry screws for driving into concrete, stored loose in a clear plastic tub.

Assorted collated nails for pneumatic nailers — wire-collated coil nails plus plastic and strip-collated framing nails.

Pack of 100 concrete screw anchors, 3/16 inch by 1-1/4 inch, with the required drill bit included; for fastening into concrete, brick, and block.

Boxes of 18-gauge brad nails and 16-gauge angled finish nails.

Assorted boxes of staples and brad nails, including T50 staples and 18-gauge brads.

Replacement chainsaw chain for a 12-inch bar: 3/8 inch low-profile pitch, .043 inch gauge, 45 drive links; fits many Black+Decker, Craftsman, Echo, Husqvarna, and Makita saws.

Green self-healing cutting mat printed with a measurement grid and angle guides.

Several carbide-tipped (TCT) circular saw blades for cutting wood.

Assorted boxes of wood and construction screws in various lengths, including pocket-hole and deck screws.

Plastic organizer bin filled with bagged flat, fender, and lock washers in assorted sizes.

Assorted abrasive cut-off and grinding wheels sized for an angle grinder.

High-visibility orange marking chalk refill for a chalk line reel.

Spring-loaded bent needle-nose pliers with blue and yellow cushioned grips.

Cup-style oil filter cap wrenches in several sizes, including a metal multi-flute cap and black plastic caps, plus a handle tool.

Plastic blade packaged in a retail bag with its additional attachments.

Pair of two-jaw pullers with threaded center forcing screws, with a bag of extra jaws and hardware.

Hand rollers (brayers) with wood and plastic handles and rubber or metal rollers, for ink, glue, or seam work.

Flat steel multi-spanner with several differently sized hexagonal and open-end openings cut along its length for turning multiple bolt sizes.

Long cylindrical wire brush mounted on a hex-shank adapter so it can be chucked into a drill for scrubbing out bores, tubes, and other deep openings.

Assortment of slim needle/precision files together with hook picks and a small wire brush, for fine deburring, filing, and cleaning in tight spots.

Convertible snap-ring pliers with interchangeable jaw tips for internal and external retaining rings, sized to grip very small clips.

Heavy cast-steel chain breaker / rivet tool with a threaded driving pin for pressing chain pins in and out; stamped "...CTECH U.S.A." on the body.

Mixed set of slim blue-handled awls/scribes together with a pair of end-cutting pliers and an OX-branded tool; exact cutting function uncertain.

Compact spring-loaded tubing cutter for copper and other small-diameter pipe, with a knurled feed knob and a rotating cutting wheel.

Matched pair of rubber-gripped hand tools with wide wedge-shaped heads and molded finger grooves on top.

Two drill-mounted rotary attachments: a crimped steel wire wheel brush and a coarse 3M abrasive stripping/cleaning disc, both on shanks sized for a drill chuck.

Pistol-grip pressure gauge with a round analog dial reading roughly 0–120, most likely for checking tire pressure.

Set of steel center punches, pin punches, and nail sets with assorted colored grips, driven by tapping with a hammer.

Folding-blade feeler gauge for measuring small clearances such as spark-plug gaps, contact points, and tappets.

Assorted drill bits, screwdriver and driver bits, carbide rotary files, a tap set, and screw extractors stored across several bit cases.

Combination wrench set paired with a ratcheting socket set in a blue WORKPRO carrying case, including a flex-head ratcheting wrench.

A precision screwdriver set with interchangeable bits alongside several assortment kits of small screws and machine screws in compartment cases.

Several compartment organizer cases of small hardware: machine screws, bolts, nuts, washers, wall anchors, screw eyes and cup hooks, and picture-hanging brackets.

Assorted staples (Arrow T50, T20, and heavy-duty PowerShot/Stanley) and boxes of aluminum blind rivets.

Hex key sets in SAE and metric sizes: Kobalt T-handle hex keys plus L-shaped and folding hex key sets.

Box of 20 zinc-plated heavy-duty wedge anchors for concrete, brick, and stone; each includes a threaded stud, expansion clip, nut, and washer.