Garage

Portable lithium jump-start pack for car batteries, in a black zippered soft case with white JUMP STARTER lettering.

Roll of metallic foil adhesive tape with a dark foil backing; used for sealing, patching, and heat- and moisture-resistant repairs.

Assortment of tape rolls, including blue, clear, and black rolls.

Black plastic knob/foot with a wide oval base and a threaded metal stud with washer; a replacement handle or leveling foot.

Compact black rechargeable LED light with a power button and an elastic strap.

Small roll of clear/transparent adhesive tape.

Roll of white PTFE (Teflon) thread seal tape for sealing threaded pipe fittings.

Needle-nose pliers with insulated blue grips for gripping and bending wire in tight spaces.

Red box/torpedo spirit level with multiple bubble vials for checking level and plumb.

Self-adjustable ratcheting ferrule crimping tool with a case of assorted insulated wire-end ferrules (blue, yellow, red, and bare sleeves).

Box of clear hot-melt glue sticks for a glue gun.

DeWalt cordless radiant jobsite heater with a wire grille guard; powered by a DeWalt 20V MAX battery.

Wood-handled awl - a slender pointed hand tool for marking, piercing, and starting holes.

Assorted rolls of colored vinyl electrical tape (blue, green, yellow) for phase marking and insulating.

Roll of silver cloth-backed duct tape for general-purpose repairs and bundling.

Roll of black vinyl electrical tape (UL listed) for insulating and bundling wires.

Roll of clear/transparent adhesive tape.

Roll of blue painter's masking tape for clean paint edges and temporary masking.

Pair of ratcheting RJ45 crimping tools for pass-through modular plugs; terminates Ethernet cable.

Cat6 pass-through RJ45 modular plugs for terminating Ethernet cable; two containers (Cable Matters 100-pack jar and UBIGEAR 100-piece bag).

Inline RJ45 coupler for joining two Ethernet patch cables end to end.

Portable Ethernet cable tester in a zippered carrying case; checks continuity and wiring order of RJ45 network cables.

Gold-plated shielded 8P8C/RJ45 modular plug connectors for terminating Ethernet cable; 10-pack (P/N SJ650, UL E136825).

Retail-boxed Ethernet patch cable with gold-plated RJ45 connectors; compatible with routers, modems, PCs, laptops, and game consoles.

VCELINK shielded RJ45 modular plug connectors in assorted colors (blue and red boots) for terminating Ethernet cable (P/N SJ650, UL E136825).

Bin of automotive electrical bits — a 220-piece blade-fuse assortment (mini/standard), assorted loose blade and glass fuses, inline fuse holders/taps, and a 100W load resistor.

A bagged black inline electrical component with red/black leads (marked NT30TFNCE120CB, likely a thermal protector/limiter) shown with a 200-piece fast-blow glass fuse assortment kit (5x20mm and 6x30mm).

Two Qianji JQX-62F 80A high-power relays — one with a 12VDC coil (JQX-62F-2C) and one with an AC110V coil, rated 250VAC/28VDC.

Omron G9EA-1-B high-capacity DC power relay with a 12VDC coil (model G9EA1003H), new in box.

Victron Energy BatteryProtect BP 12/24 100A — a low-voltage battery disconnect that cuts the load to protect a 12/24V battery from over-discharge, with programmable alarm/remote terminals.

Waterproof, ignition-protected 40A resettable circuit breaker with a manual reset button, for 12V DC automotive, marine, and audio systems.

Pair of DIN-rail miniature circuit breakers, model DZ47-63Z, rated C63 (63A) at 250V, ganged together with a lead.

Drawer holding a green hard case, an orange case, ziploc bags of hardware, and a sharpening stone.

MidNite Solar MNEPV30 30A DIN-rail DC circuit breaker for solar PV systems; polarity sensitive.

Gold aluminum-housed wirewound power resistor rated 100W, 10 ohm — the type used as an LED load resistor or dummy load.

Drawer of crimping and terminal tools — a rivet-nut/riveter tool and crimp pliers — plus assorted crimp and heat-shrink wire connector kits.

Boxed plug-in AC power adapter; no model or ratings visible on the box.

Bin of miscellaneous salvaged parts — wiring harnesses, connectors, brackets, wire loom, and an aluminum plate.

Pen-style non-contact voltage detector that lights and beeps near live AC wiring.

Black AC/DC power adapter brick with a DC barrel-plug lead.

Drawer of unsorted miscellaneous items — Razor electric-scooter parts, a DeWalt battery/charger item, wiring, and a heatsinked amplifier.

Modified-wave 150W power inverter (model MRI1511AU) that plugs into a 12V socket and provides an AC outlet plus USB charging (5V/4.2A).

Assortment of power-tool accessories and attachments — angle/miter gauge (Ryobi), auxiliary side handles, dust-port adapter, edge/rip guide, and assorted small parts.

Soft black microfiber drawstring pouch (Oakley HDO) and a gray microfiber lens-cleaning cloth (printed BRIDGES) for eyewear.

Automatic trickle charger/maintainer for 12V lead-acid batteries (model YS-1201250, output 13.8V/1250mA) with alligator-clip leads and a charge status light.

Assortment of house, padlock, and equipment keys, several tagged with labels such as Rear Door and Milwaukee Toolbox Bottom; some sealed in small bags.

Stack of assorted product instruction and owner's manuals for appliances, tools, and equipment.

Assortment of adhesives, sealants, epoxies, and thread lockers — gasket maker, threadlocker, polyurethane sealant, epoxy putty, and wood filler among them.

Assorted rolls of perforated metal hanger/plumber's strapping (galvanized) with mounting holes, plus a few plastic strapping reels.

Set of split-core current-transformer (CT) clamps with lead cables and small jack connectors, used with a home energy monitor to sense current on mains conductors.

Zippered tool roll with red plastic trim/panel pry tools and black terminal release / pin-extraction tools.

Pair of U-shaped steel DIN radio removal keys used to release and pull a car head unit out of the dash.

Item described in a voice note as possibly a fuse holder; no photo available to confirm.

Hand scratch awl / scriber with a red-and-black handle and a long pointed steel shaft, for marking and piercing.

Case of terminal release and pin-extraction tools with assorted tips for depinning automotive and electronic wiring connectors.

Bag of black self-adhesive cable clips / cord mounts with peel-and-stick backing for routing and securing wires.

Smart battery checker/meter for RC LiPo and other packs; reads overall and per-cell voltage, capacity, and internal resistance.

An opened round/squircle electronic device exposing its LCD and circuit board with a multi-wire harness; make and function are not identifiable from the photo.

Laser detector/receiver for line lasers, with a clamp mount; picks up laser lines beyond visible range for outdoor leveling.

Compartment organizer box filled with assorted automotive push-type retainer clips, trim fasteners, and nylon rivets in various sizes.

Three plug-in WiFi smart outlets, each with a single AC receptacle and a power button, for app or voice control of plugged-in devices.

Red-handled pliers with an offset hooked jaw for removing automotive trim panel clips and retainer fasteners.

Small zippered case holding a coiled yellow cable with a threaded connector plus a black accessory; the specific device is not identifiable from the photo.

Zippered case of red plastic trim and panel removal pry tools for automotive interior work — wedges, pry bars, and clip lifters.

Round 7-blade (7-way) trailer wiring connector plug with labeled pin terminals for trailer/RV lighting and brakes; includes a mounting bracket/holder.

Two small brush-cap automotive touch-up paint bottles; one bagged and labeled Touch Up Paint (red), the other clear with a black cap.

Compact power inverter that plugs into a vehicle 12V cigarette-lighter socket and provides a standard household AC outlet.

Plug-in GFCI outlet tester with indicator lights for open ground, open neutral, open hot, reversed wiring, and correct wiring, plus a button to trip and verify GFCI outlets.

Two-piece wire continuity tester with a main unit and a separate remote end, used to trace and verify continuity of wire runs.

20-piece set of white nylon hole plugs / push retainers with rubber O-rings, 5mm, fitment for Tesla Model X (part 1025401-00-A); shown new in the original mailer.

Pair of hinged black plastic clamp brackets that fasten around a round tube or pole, tightened with a screw.

Rechargeable LED bicycle front headlight with a handlebar mount.

Trailer wiring adapter with a round 7-way plug on one end and a blade socket with a flip-up weather cover on the other.

Three-bottle automotive touch-up paint set for Tesla Midnight Silver Metallic (color code PMNG): primer, waterborne base color, and clearcoat.

Dual-tip automotive touch-up paint pen in pearl white, with a fine paint tip on one end and a brush applicator on the other for covering paint chips and scratches.

Plug-in electricity usage monitor with an LCD readout for voltage, amperage, wattage, frequency, power factor, and cumulative kilowatt-hours of a plugged-in device.

Three folding lock-blade utility/pocket knives, one branded Husky, the others slim metal-clip folders.

Plug-in electricity usage monitor with an LCD readout for voltage, amperage, wattage, frequency, power factor, and cumulative kilowatt-hours of a plugged-in device.

Castable wireless sonar fish finder: a waterproof sonar ball that pairs with a phone to read water depth and locate fish. Comes with its neoprene carry pouch.

Handheld circuit breaker finder transmitter that plugs into an outlet and pairs with a receiver to identify which breaker controls a given circuit.

Assortment of Square D Homeline (HOM) plug-in circuit breakers in mixed amperages from 15A to 50A, both single- and double-pole (DP-4075).

Corded handheld wood router with fixed base and dual grip knobs for edge profiling and joinery; accepts standard router bits.

Assorted carbide router bits in a wooden storage box, covering multiple edge and groove profiles.

Set of roundover/beading profile router bits in a clear storage case.

Cordless 5 in. random orbital sander with hook-and-loop dust-extraction pad. Bare tool.

Assorted red vinyl-coated screw-in utility/storage hooks, braided bungee cords, and a pair of pliers.

Set of yellow ratchet tie-down straps with metal ratchet mechanisms and J-hooks for securing cargo.

Air-powered framing nailer with angled magazine for plastic-collated framing nails; runs off an air compressor.

Air-powered angled finish nailer with angled nail magazine; runs off an air compressor.

Boxes of electrogalvanized ring-shank collated coil roofing nails (3/4 in. x .120 in.) for pneumatic coil roofing nailers.

Air-powered coil nailer (model NV88AH2) with round coil magazine for collated coil nails; runs off an air compressor.

Cordless coil roofing nailer with round coil magazine for driving collated roofing nails. Bare tool.

Cordless brushless framing nailer with angled magazine for paper-collated framing nails. Bare tool.

Assorted garments on hangers — dark jackets/coveralls and a blue-and-white striped button shirt.

Cordless brushless belt sander for stock removal and surface smoothing. Bare tool.

Cordless handheld wood planer with top carry handle and adjustable depth for smoothing and dimensioning lumber. Bare tool.

Assortment of sanding accessories (sandpaper and pads) stored in a DeWalt clear-lidded case.

Brushless 3-speed 1/2 in. high-torque impact wrench with detent-pin anvil (model DCF899). Bare tool.

Compact cordless impact wrench with square-drive friction/detent anvil and forward/reverse control. Bare tool.

Brushless 1/2 in. high-torque impact wrench with detent-pin anvil. Bare tool.

Cordless SDS-Plus rotary hammer drill with D-handle grip and removable side handle for drilling and light chipping in concrete and masonry. Bare tool.

Cordless oscillating multi-tool for cutting, sanding, and scraping; accepts standard oscillating accessories. Bare tool.

Cordless dual-cartridge adhesive/epoxy dispensing gun for two-part adhesives.

Portable battery-powered vacuum lifter that grips flat surfaces like tile, glass, and drywall to lift and move them.

Cordless rear-handle circular saw for cross-cutting and ripping lumber.

Cordless angle grinder for cutting and grinding metal using abrasive wheels.

Cordless rotary sander/polisher with a backing pad and side handle.

Cordless driver fitted with a long stand-up auto-feed collated screw attachment for floor and deck screws.

Corded heat gun for stripping paint, softening adhesives, and shrinking tubing.

Pneumatic (air-powered) die grinder for grinding and deburring.

Cordless angle grinder for cutting and grinding metal using abrasive wheels.

Pneumatic (air-powered) die grinder with a collet for burrs and cutting bits.

Cordless compact reciprocating saw (Sawzall-type) for demolition and cutting, XR 20V MAX.

Strips of collated screws that load into an auto-feed screw gun.

Compact cordless circular saw with a metal shoe for cutting boards and sheet stock.

Self-leveling laser level with a magnetic pivot mounting bracket.

Cordless 60V circular saw for cross-cutting and ripping lumber.

Cordless brushless drywall screwgun with a depth-setting nose, model DCF620.

Auto-feed collated screw gun that drives screws from a loaded strip.

Cordless jigsaw for curved and straight cuts, model DCS331.

Demolition / rotary hammer for breaking concrete and heavy drilling.

Cordless right-angle drill with a keyless chuck for driving and boring in tight spaces.

Two hard cases holding large socket sets and driver/insert bits.

Boxes of disposable blue nitrile gloves, rip-resistant, size large.

Boxes of disposable nitrile gloves in size large, including heavy-duty black pairs and blue exam pairs.

Assortment of mallets and hammers, including a rubber mallet and a wood-handled hammer.

Cordless battery-powered staple guns for driving staples.

Pocket-hole jig for joining wood, with the drill guide, clamp, attachments, and included screws.

Pair of stainless steel locking forceps (hemostats) with ratcheting ring handles.

Coils of rigid quarter-inch OD poly tubing in assorted colors (red, green, yellow, blue), plus white RO tubing. High-quality tubing used to plumb an automatic pump/timer setup.

Hand-operated come-along with a lever ratchet, toothed gear, steel cable, and forged safety hook for pulling or tensioning heavy loads.

One-piece steel masonry hammer with a square striking face and a flat chisel blade, cushioned anti-vibration grip.

Set of assorted plastic automotive funnels, including a flexible-spout funnel, for adding fluids.

Long steel shaft with a molded red handle, resembling a straight hex/Allen driver.

Barrel-style grease gun driven by a power drill to pump grease into zerk fittings.

Open-reel long tape measure with a fiberglass blade for measuring long distances.

Orange skeleton-frame manual caulking gun for dispensing tubes of caulk or sealant.

Handheld gravity-feed air sandblasting gun with a top-mounted media hopper and adjustable abrasive flow.

Air-powered caulking gun (model CP9885) for dispensing sealant or adhesive tubes; rated ~90 PSI.

Heavy-duty bolt cutter with long red handles for cutting bolts, chain, and padlocks.

Steel flat pry/wrecking bar with a forked nail-puller at one end and a curved beveled prying blade at the other.

Coiled braided-steel cable bike lock with an integrated Kryptonite locking head, for securing a bicycle frame and wheels.

20-foot roll of heavy-duty black self-adhesive hook-and-loop (Velcro-style) fastening tape that mounts without screws.

A large black funnel and a smaller red funnel with an angled pour spout, for transferring fluids such as oil, fuel, or coolant.

Cast-aluminum rafter/layout square with degree, common, and hip/valley scales for marking and measuring angles.

Hydraulic trailer tongue-weight scale that measures the downward tongue load a trailer places on the hitch.

T-handle compression sleeve/ferrule puller for removing stuck compression fittings from tubing; in original blister packaging.

Red keyed universal trailer coupler lock that clamps over a hitch coupler to block the ball socket and prevent unauthorized towing.

Assortment of hole saws in various diameters with a mandrel/arbor and a pilot bit.

Mixed assortment of tape rolls including Gorilla tape, colored masking/painter's tape, double-sided tape, and clear packing tape.

50-foot steel fish tape wound in a round reel case, used to pull wire through conduit and wall cavities.

Manual crimping and sealing tool with cushioned handles, used to clamp steel strapping seals shut around banding.

Box of 2,500 divergent-point hog ring staples (model M7-RING61G050) for pneumatic hog ring guns.

Assortment of metal strapping seals (crimp clips) for securing steel banding, plus a bag of wire buckles. Made in USA.

Diagonal cutting pliers (side cutters) with red insulated grips.

Tool with a blue metal frame, a white nylon roller, and a spring-loaded lever mechanism on a long handle; exact function unclear.

Pair of long dark steel bars/rails with a channeled profile; specific use unknown.

Pair of flat silver strips with a row of rectangular slots down the center and a pointed tip; specific use unclear.

Length of polished stainless steel round tube.

Spring-loaded pliers with a notched jaw for closing metal ring fasteners such as hog rings and metal cable ties.

Bag of coated stainless steel self-locking cable ties, 4.6 mm x 300 mm, roughly 100 count.

Box of 1000 galvanized hog rings, 11/16 in (17.4 mm), model DWR16G1M; for fastening fabric, fencing, cages, wreaths, nets, and bags.

Metal rod with a black plastic head; likely a paint roller frame.

Turned wooden handle with a long curved steel shaft; a wood-turning lathe gouge/chisel.

Assortment of putty knives and scrapers with wood, rubber, and plastic handles in various widths.

Assortment of natural-bristle wooden-handled paint/chip brushes in various sizes, several still packaged.

White flexible strips with peel-and-stick adhesive backing (release liner visible).

Rolls of single-sided adhesive-backed black foam padding tape.

Pair of black hook-and-loop (Velcro) strips, bagged.

Roll of black stretchy self-fusing rubber tape (adhesive rubber wrap).

Coiled roll of thin black foam with adhesive backing; peel-and-stick foam strip.

Beige D-shaped peel-and-stick pad, thin and flexible, with adhesive backing. Cushioning/padding of unknown specific application.

Roll of black cloth strapping with hook-and-loop (Velcro) backing.

Stainless steel protractor with a sliding rule; combines angle finder, center finder, square, circle divider, drill point gauge, and a tap drill size chart.

Black articulated multi-arm layout template with ruler scales on each arm and a central pivot block; used to trace and transfer angles for marking and layout.

Large metal wing divider with a curved locking arm and pointed steel legs, used to scribe circles and step off or transfer measurements.

Red corded hot-melt glue gun with trigger feed, uses standard glue sticks.

Assorted fine-grit wet/dry sanding sheets (1000, 1500, 2000, 2500 grit, about 3.66 in / 9.3 cm wide) for wet-sanding and polishing automotive clear coat.

Blue plastic contour duplication gauge whose closely-spaced sliding pins copy the profile of an edge or molding to transfer the shape for cutting.

Bundle of long hot-dip galvanized hex-head lag screws with washers, for heavy timber and structural fastening.

Coiled roll of self-adhesive foam/rubber weather-sealing strip with a peel-off backing tape, for sealing gaps around doors and windows.

Cased set of carbide-tipped router bits in assorted profiles, several with pilot bearings for edge and flush-trim routing.

Bi-metal hole saw set in a hard case with assorted-diameter saw cups, arbors/mandrels, and pilot drill bits for cutting round holes.

Cordless brushless high-torque impact wrench with a square drive and slide-on battery, stored in a molded hard case.

Coiled peel-and-stick under-door draft seal with a soft rubber/silicone flange that presses onto a door bottom to block drafts.

Pack of 24 all-purpose mini hot-melt glue sticks, 4 in (10 cm) long and 5/16 in (8 mm) diameter, sized for mini glue guns.

Elastic-edged wool buffing bonnets that slip over a polisher or buffer pad for applying wax and polishing.

Green-bodied snap-off segmented-blade utility knife with a sliding blade lock.

Grouped repair glues including a clear marine-grade GOOP adhesive tube plus squeeze-bottle glues for household and marine fixes.

Reusable double-sided hook-and-loop wrap for bundling cables and wires; 15mm x 5m rolls.

Cordless brushless hammer/rotary drill for boring into concrete and masonry; bare tool, no battery shown.

Cordless circular saw with carbide blade for cutting wood; bare tool, no battery shown.

Socket-style driver tools for twisting wire-mesh connectors closed, with a hex bit adapter.

Telescoping magnetic pickup wands for retrieving dropped ferrous parts from tight spots.

Dual-end pry bar with a forked nail-puller claw on one end and a flat pry/scraper blade on the other, with a cushioned grip.

Long polished chrome metal rods/bars.

High-leverage compact bolt/wire cutters for cutting hardened wire, nails, bolts, and rivets.

Spring-loaded flexible-shaft claw pickup tools for retrieving small dropped parts from tight spaces.

Ratcheting PVC pipe cutter with a blue handle for clean, square cuts on plastic pipe and tubing.